600WDL (W/PW Series Sewage Pumps) Parts Listtotal 35 items, 33 part codes, including Impeller (600WDL-102) , Frame Plate Liner (600WDL-104) , Pump Casing (600WDL-101) , Front Pump Cover (600WDL-105) , Gland P12 (J452-W501891) , Shaft Sleeve P12 (J524-W226366) etc.; look up the material, unit weight and all fitting models of a part.
It belongs to Sewage & Clean-water Pumps. The table below lists all its parts from the factory parts book; the first items usually replaced are Impeller (600WDL-102) , Frame Plate Liner (600WDL-104) , Pump Casing (600WDL-101) , Front Pump Cover (600WDL-105) .
The table below lists all parts of this model — part name, part code, material/spec, unit weight and unit. Click a part code to see its materials and every model it fits.
| Part Name | Part Code | Material / Spec | Unit Wt. | Unit |
|---|---|---|---|---|
| Pump Casing | 600WDL-101 | HT250 | 1869 | pc |
| Front Pump Cover | 600WDL-105 | HT250 | 242 | pc |
| Impeller | 600WDL-102 | HT250 | 380 | pc |
| Frame Plate Liner | 600WDL-104 | HT250 | 191 | pc |
| Shaft | 600WDL-103 | 45 | 205.57 | pc |
| Bearing Seat | 600WDL-111 | A3.A3F | 963.68 | pc |
| Intermediate Cylinder | 600WDL-111-1 | A3.A3F | 182.72 | pc |
| Motor Seat | 600WDL-110 | A3.A3F | 2971.5 | pc |
| Suction Elbow | 600WDL-109 | HT250 | 370 | pc |
| Seal Ring | 600WDL-106 | HT250 | 31.6 | pc |
| Inspection Cover | 600WDL-107 | HT250 | 27.3 | pc |
| Inspection Cover | 600WDL-108 | HT250 | 22.3 | pc |
| Rear Pump Cover V12/630 | J163-W212522-52 | HT250 | 156.3 | pc |
| Impeller Cap P12 | J260-W226322 | HT200 | 2.37 | pc |
| Gland P12 | J452-W501891 | HT250 | 4.9 | pc |
| Packing Sleeve P12 | J456-W501894-00 | HT200 | 4.23 | pc |
| Bearing Shim | J500.23-AN767 | 20 | 2.65 | pc |
| Water Guard Ring | J507-S120/ZN137 | A3.A3F | 2.28 | pc |
| Shaft Sleeve P12 | J524-W226366 | CS1 | 21.86 | pc |
| Impeller-cap Washer | J550-W226321 | 20 | 3.61 | pc |
| Key P12 3Cr13 | J940.01-W501899 | 3Cr13 | 0.66 | pc |
| Dowel Pin 38 | SBB006-410-3 | 45 | 2.92 | pc |
| Retaining Ring 38 | SBB006-410-5 | A3.A3F | 0.16 | pc |
| Elastic Ring | SBB00638 | Natural Rubber | — | pc |
| Pump Coupling Half 110 | SBB006A-410-01 | HT200 | 108.14 | pc |
| Motor Coupling Half 130 | SBB006A-410-02 | HT200 | 117 | pc |
| Pipe Plug G3/8" | SBB108-91-01 | A3.A3F | 0.1 | pc |
| Pipe Plug G1/2" | SBB108-91-02 | A3.A3F | 0.2 | pc |
| Pipe Plug G1" | SBB108-91-02 | A3.A3F | 0.57 | pc |
| Stud M20X115 | SBB108-91-03 | 35 | 0.43 | pc |
| Bearing Seal Cover JV6034 | SBB111-91 | A2.A2F | 0.11 | pc |
| Bearing Seal Cover AV6324 | SBB111-91 | A2.A2F | 0.12 | pc |
| Bearing Cover | SBB115-09W-01 | HT250 | 12.82 | pc |
| Bearing Cover | SBB115-10W-01 | HT250 | 18.39 | pc |
| Packing Guard Ring A140 | SBB116-08 | HT200 | 9.37 | pc |
Weights are for reference onlyUnit weight varies with material, batch and minor structural changes, For reference only — actual weight per drawing and factory weighing. For exact weights call 13930163303 (WeChat same number) to verify.
Part codes of this model grouped by part name; click any code to see the models it fits.
Send “pump model + part code + material + quantity” for a fast quote. Even a single old part or a nameplate photo is enough — we will identify the part number from the parts book. Common wear parts (impeller, liner, throat bush, frame plate liner, shaft sleeve, stuffing box, expeller cover, expeller) are kept in stock.