KVR100-250 (KVR Series Sewage Pumps) Parts Listtotal 48 items, 37 part codes, including Impeller D2=220/195 (W162759-00) , Throat Bush (W162735-00) , Frame Plate Liner P04/250 (J135.02-W229387) , Pump Casing (W162734-75) , Rear Pump Cover V04/250 (J163-W501147-01) , Gland P04 (J452-W151697) etc.; look up the material, unit weight and all fitting models of a part.
It belongs to Sewage & Clean-water Pumps. The table below lists all its parts from the factory parts book; the first items usually replaced are Impeller D2=220/195 (W162759-00) , Throat Bush (W162735-00) , Frame Plate Liner P04/250 (J135.02-W229387) , Pump Casing (W162734-75) .
The table below lists all parts of this model — part name, part code, material/spec, unit weight and unit. Click a part code to see its materials and every model it fits.
| Part Name | Part Code | Material / Spec | Unit Wt. | Unit |
|---|---|---|---|---|
| Pump Casing | W162734-75 | HT250 | 4415 | pc |
| Impeller D2=220/195 | W162759-00 | HT250 | 12 | pc |
| Impeller D2=220/215 | W162758-00 | HT250 | 12 | pc |
| Impeller D2=240/235 | W162757-00 | HT250 | 14.5 | pc |
| Impeller D2=260/255 | W162756-00 | HT250 | 17 | pc |
| Throat Bush | W162735-00 | HT250 | 5.7 | pc |
| Key 12X8X70 | GB1096-79 | 3Cr13 | 0.17 | pc |
| Intermediate Ring | W501367 | A3.A3F | 30 | pc |
| Suction Elbow DN100 | J139-W501137 | HT250 | 17.3 | pc |
| Frame Plate Liner P04/250 | J135.02-W229387 | HT250 | 14 | pc |
| Inspection Cover 115X22 | J164-W159252 | HT250 | 4.3 | pc |
| Inspection Cover 115X22 | J164-W500729 | HT250 | 3.9 | pc |
| Rear Pump Cover V04/250 | J163-W501147-01 | HT250 | 20 | pc |
| Shaft P04 | J210-W218936 | 45 | 20 | pc |
| Shaft P04ax | J210-W212500 | 45 | 20 | pc |
| Bearing Seat V04 | J330-W501363 | HT250 | 82.15 | pc |
| Bearing Seat V04ax | J330-W501362 | A3.A3F | 80.32 | pc |
| Bearing Adjusting Sleeve V04ax | J382-W163780 | HT250 | 7.6 | pc |
| Gland P04 | J452-W151697 | ZG230-450 | 0.8 | pc |
| Packing Sleeve P04 | J456-W159219-00 | HT200 | 1.41 | pc |
| Lantern Ring P04 | J458-B55/ZN2820 | HT200 | 0.93 | pc |
| Shaft Sleeve P04 | J524-W159218 | 3Cr13 | 2.63 | pc |
| Cross Handle D50 | J576-DIN6335 | HT200 | 0.14 | pc |
| Cross Handle D80 | J576-DIN6335 | HT200 | 0.45 | pc |
| Mounting Plate V04 | J893-KVR100-250-01 | HT250 | 28 | pc |
| Impeller Screw P04 | J906-W500504 | 20 | 1.22 | pc |
| Key P04 | J940.01-W151862 | 45 | 0.14 | pc |
| Key P04 3Cr13 | J940.01-W151862 | 3Cr13 | 0.14 | pc |
| Pipe Plug G1/2" | SBB108-91-02 | A3.A3F | 0.2 | pc |
| Pipe Plug G1" | SBB108-91-02 | A3.A3F | 0.57 | pc |
| Stud M12X50 | SBB109-91-01 | 35 | 0.07 | pc |
| Bearing Seal Cover JV6213 | SBB111-91 | A2.A2F | 0.04 | pc |
| Bearing Seal Cover JV6311 | SBB111-91 | A2.A2F | 0.04 | pc |
| Support Washer A1000 | SBB112-91-01 | A3.A3F | 0.62 | pc |
| Shim 1001 | SBB112-91 | A3.A3F | 0.04 | pc |
| Shim 1003 | SBB112-91 | A3.A3F | 0.1 | pc |
| Combined Adjusting Shim A108/120 | SBB112-91 | A3.A3F | 0.19 | pc |
| Support Washer A108/120X3.5 | SBB112-91-02 | A3.A3F | 0.45 | pc |
| Shim 108/120X0.1 | SBB112-91 | A3.A3F | 0.04 | pc |
| Shim 108/120X0.3 | SBB112-91 | A3.A3F | 0.06 | pc |
| Shim 108/120X0.5 | SBB112-91 | A3.A3F | 0.1 | pc |
| Shim 72/120X0.5 | SBB112-91 | A3.A3F | 0.08 | pc |
| Shim 85/140X0.5 | SBB112-91 | A3.A3F | 0.13 | pc |
| Bolt BM16X70 | SBB113-91-05 | 2Cr13 | 0.28 | pc |
| Bearing Cover | SBB115-03W-02 | HT250 | 2.8 | pc |
| Bearing Cover | SBB115-03W-03 | HT250 | 4 | pc |
| Bearing Cover | SBB115-17W | HT250 | 3 | pc |
| Packing Guard Ring A55 | WBB116-03 | HT200 | 2.47 | pc |
Weights are for reference onlyUnit weight varies with material, batch and minor structural changes, For reference only — actual weight per drawing and factory weighing. For exact weights call 13930163303 (WeChat same number) to verify.
Part codes of this model grouped by part name; click any code to see the models it fits.
Send “pump model + part code + material + quantity” for a fast quote. Even a single old part or a nameplate photo is enough — we will identify the part number from the parts book. Common wear parts (impeller, liner, throat bush, frame plate liner, shaft sleeve, stuffing box, expeller cover, expeller) are kept in stock.